Instructions For Upgrading Easy Upgrade To Version 3.X; Overview; Upgrade Procedure - Emerson 475 Upgrade Procedures

January 2011
Instructions for Upgrading Easy Upgrade to Version 3.x and
Field Communicator to Version 3.x
Important – Read the following Overview and Prerequisites before proceeding with the
upgrade instructions.
Note: If your Field Communicator is already updated to version 3.x, you only need to perform Step 1 to
upgrade Easy Upgrade to version 3.x.

Overview

There are five steps to upgrade your Field Communicator to the version 3.x software.
Step 1: Use the current Easy Upgrade Utility (version 3.0 or earlier) to download and install the
new Easy Upgrade Utility version 3.x.*
Step 2: Use the Update PC button in the new Easy Upgrade Utility (version 3.x) to
download new version 3.x System Software and DDs to your PC.*
Step 3: Use the new Easy Upgrade Utility (3.x) to upgrade to version 3.x software on the Field
Communicator System Card. This requires a Secure Digital card reader.
Step 4: Insert the upgraded System Card into the Field Communicator to upgrade the
Field Communicator.
Step 5: Register the Field Communicator.
*Steps 1 and 2 may take up to 40 minutes, depending on Internet speed. As an alternate method for use with
slower Internet connections, the new Easy Upgrade Utility, along with the version 3.x software and DDs, can
be downloaded directly from
you have an unreliable or slow Internet connection, please contact
alternate methods of upgrading your communicators.)
After the download, save the file and run the Easy Upgrade Utility install program (TPUInstall.exe) from
a root directory (e.g.: C:\ or D:\) on your hard drive, CD, DVD, or removable flash memory drive. Make sure
you remove any old Easy Upgrade install programs before you run this newer install. Then proceed to Step 3
when installation is complete. A password is required to unzip this file. This is necessary for export
compliance reasons and can be obtained by calling
If multiple Field Communicators are being upgraded from a single PC, steps 1 and 2 need to be completed
once.
© 2011, Emerson Process Management
ftp://ftp.emersonprocess.com/AO/Downloads/ResourceCD/475resourcecd.zip
Field Communicator Technical Support.
www.fieldcommunicator.com

UPGRADE PROCEDURE

Field Communicator Technical Support
Page 2 of 11
(If
for