Setting Details - Mitsubishi Electric Mr. Slim PLA Series Service Manual

Main menu list
Setting and display items
Vane · Louver · Vent. (Lossnay)
High power**
Timer On/Off timer*
Auto-Off timer
Weekly timer*
Restriction Temp. range
Operation lock
Energy saving Auto return
Schedule*
Night setback*
Filter information
Error information
Maintenance Auto descending panel** Auto descending panel (Optional parts) Up / Down you can do.
Manual vane angle**
Initial setting Main/Sub
Clock
Main display
Contrast
Display details
Auto mode
Administrator password
Language selection
Service Test run
Input maintenance
Function setting
Check
Self check
Maintenance password Use to change the maintenance password.
Remote controller check When the remote controller does not work properly, use the remote controller checking function to trou-
OCH581
Use to set the vane angle.
Use to turn ON / OFF the louver.
Use to set the amount of ventilation.
Use to reach the comfortable room temperature quickly.
Use to set the operation On/Off times.
Use to set the Auto-Off time.
Use to set the weekly operation On / Off times.
Use to restrict the preset temperature range.
Use to lock selected functions.
Use to get the units to operate at the preset temperature after performing energy-save operation for a
Set the start/stop times to operate the units in the energy-save mode for each day of the week, and set the
energy-saving rate.
Use to make Night setback settings.
Use to check error information when an error occurs.
When connecting two remote controllers, one of them needs to be designated as a sub controller.
Use to set the current time.
Use to switch between "Full" and "Basic" modes for the Main display.
Use to adjust screen contrast.
Make the settings for the remote controller related items as necessary.
Clock:
Temperature:
Room temp. :
Auto mode:
Whether or not to use the Auto mode can be selected by using the button.
This setting is valid only when indoor units with the Auto mode function are connected.
The administrator password is required to make the settings for the following items.
Use to select the desired language.
Select "Test run" from the Service menu to bring up the Test run menu.
Select "Input maintenance Info." from the Service menu to bring up the Maintenance information screen.
The following settings can be made from the Maintenance Information screen.
Make the settings for the indoor unit functions via the remote controller as necessary.
Error history:
Refrigerant leak check:
Smooth maintenance:
Request code:
Error history of each unit can be checked via the remote controller.
blushoot the problem.

Setting details