1. Manuals
  2. Brands
  3. Snapper Manuals
  4. Lawn Mower
  5. ELP216753BDV
  6. Safety instructions & operator's manual

Snapper ELP216753BDV Safety Instructions & Operator's Manual

European 21” cast aluminum deck self-propelled walk mowers series 3
Hide thumbs Also See for ELP216753BDV:
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL DESIGNATION
SELF-PROPELLED
CUTTING WIDTH
E – European Model
L – Aluminum Deck
Thank you for buying a SNAPPER Product! Before operating your Walk Behind, read this manual carefully and pay
particular attention to the "IMPORTANT SAFETY INSTRUCTIONS" on Pages 2 - 4. Remember that all power equip-
ment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in accordance with
the operating instructions and common sense!
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained engine power will likely be lower due to operating limitations and environmental factors.
COPYRIGHT © 2006
SNAPPER - A DIVISION OF SIMPLICITY MFG., INC.
ALL RIGHTS RESERVED
Safety Instructions & Operator's Manual for
21" CAST ALUMINUM DECK
MODEL NUMBER EXPLANATION
E
L
P
P – Self Propelled
21 – 21" Cutting Width
WALK MOWERS
21
675
3
675 – 6.75 (Engine Power)
3 - Series Designation
MANUAL No. 7100981 (I.R. 10/30/2006)
EUROPEAN
SERIES 3
SELF-PROPELLED
MODEL
ELP216753BDV
BDV
ENGINE OPTIONS
SERIES DESIGNATION
ENGINE POWER *
B – Briggs & Stratton
DV – DOV™ Engine
TP 100-5211-IR-WB-N

Advertisement

Table of Contents
loading

Related Manuals for Snapper ELP216753BDV

Summary of Contents for Snapper ELP216753BDV

  • Page 1 21 – 21” Cutting Width Thank you for buying a SNAPPER Product! Before operating your Walk Behind, read this manual carefully and pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 - 4. Remember that all power equip- ment can be dangerous if used improperly.

  • Page 2: Important Safety Instructions

    If you have any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER, McDonough, Georgia 30253. Phone: (1-800-935-2967).
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS SAFE HANDLING OF GASOLINE (Continued From Previous Page) 3. DO NOT remove fuel cap or add fuel with the engine running. Allow the engine to cool before refueling. 4. DO NOT refuel the machine indoors. 5. DO NOT store the machine or fuel container inside where there is an open flame, spark or pilot light such as on a water heater or other appliances.

  • Page 4: Important Safety Instructions

    10. DO NOT test for spark by grounding spark plug next to spark plug hole; spark plug could ignite gas exit- ing engine. 11. Have machine serviced by an authorized SNAPPER dealer at least once a year and have the dealer install any new safety devices.

  • Page 5: Table Of Contents

    WARRANTY ........... .19 The figures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your Snapper dealer if you have questions.

  • Page 6: Section 1 - Familiarization

    FIGURE 1.1 1.2 NOMENCLATURE The nomenclature information above, Figure 1.1, shows the essential parts of the SNAPPER WALK BEHIND MOWERS. It is recommended that all operators of the mower become thoroughly familiar with the controls, parts and operation of the mower before operating.

  • Page 7: Section 2 - Operating Instructions

    Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check guards, deflectors, grass bag, adapter and covers to make sure all are in place and securely tightened. WARNING DO NOT start or operate this machine without installing the recycling plug or the entire grass...

  • Page 8: Starting & Stopping Wheel Drive

    Section 2 - OPERATING INSTRUCTIONS 2.2.2. PROPELLING MOWER 1. Move ground speed control to the desired speed position. See Figure 2.4. 2. Move wheel drive control against handle to engage wheel drive and propel mower forward. IMPORTANT: Forward motion of machine must be stopped before changing position of the ground speed control.

  • Page 9: Recycling Operation

    Inspect frequently and replace worn or damaged components immediately. Grass Catcher bags used on SNAPPER products are made of woven fabric, and are subject to deterioration and wear during normal usage. Check condition of bag before each use.

  • Page 10: Section 3 - Maintenance Instructions

    3.2.2. GREASE LEVEL IN TRANSMISSION The transmission requires no lubrication or mainte- nance. If transmission leaks or malfunctions, return machine to an authorized Snapper dealer for repair. 3.2.3. WHEEL DRIVE CONTROL The wheel drive control requires periodic adjustment to maintain proper drive function. The adjustment is performed with the thumbwheel located on the wheel drive control cable and requires no tools.

  • Page 11: Check Mower Blade

    Section 3 - MAINTENANCE WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Remove key. Disconnect spark plug wire and secure away from spark plug. Engine and compo- nents are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 12: Section 4 - Adjustments And Repair

    Section 3 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Remove key. Disconnect spark plug wire and secure away from spark plug. Engine and compo- nents are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 13: Wheel Drive Control Adjustment

    IMPORTANT: DO NOT over-tighten wheel drive control. DO NOT operate if control or drive does not function properly. Contact your local SNAPPER Dealer for assistance. IMPORTANT: If machine creeps forward after wheel drive control is released the cable is too tight and must be readjusted to eliminate all forward movement.

  • Page 14: Belt Service

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Remove key. Disconnect spark plug wire and secure away from spark plug. Engine and compo- nents are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 15: Troubleshooting

    1. Service mower blade. 2. Service and tighten loose parts. 3. Replace air lifts. Tighten to proper torque. 4. Replace belt. 1. Contact authorized SNAPPER dealer. 2. Replace/Adjust traction drive belt. 3 Contact authorized SNAPPER dealer. 1. Adjust cutting height.

  • Page 16: Maintenance Schedule

    ITEM SERVICE PERFORMED Engine Oil Check Oil Level Initial Oil Change Periodic Oil Change Air Pre-Cleaner Clean Sponge Element Engine Manual Air Cleaner Clean or Replace Spark Plug Replace Engine Cooling Clean Shroud & Fins System Drive Belt Check for Wear and Tension Mower Blade Check for wear,...

  • Page 17: Decal Identification

    READ, UNDERSTAND AND FOLLOW INSTRUCTIONS AND WARNINGS IN OPERATOR’S MANUAL, AND ON THE MOWER, ENGINE AND ATTACHMENTS BEFORE OPERATING. ADVISES OPERATOR OF THE DANGER OF THE ROTATING BLADE. (1) WARNING INSTRUCTIONS. GROUND SPEED DECAL P/N 7075475 (2) GROUND SPEED: SHOWS DIRECTION OF MOVEMENT AND THE ABILITY TO SELECT ONE OF THREE GROUND SPEEDS BY MOVING THE LEVER.

  • Page 18: Ce Compliance Specifications

    (6) NOISE CONTROL: THIS UNIT IS CERTIFIED TO BE WITHIN THE 98 DBA SOUND POWER LIMIT AT THE SPECIFIED ENGINE RPM. CE COMPLIANCE SPECIFICATIONS Model RPM’s (Governed) ELP216753BDV 2900 DECAL IDENTIFICATION HEIGHT CONTROL DECAL P/N 7028484 (7) EUROPEAN PERFORMANCE: MAXIMUM LEVEL OF VIBRATION MEASURED AT THE OPERATOR’S HAND IS...

  • Page 19: Warranty

    For two (2) years from purchase date for the original purchaser’s residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon examination by the factory at McDonough, Georgia, to be defective in material or workmanship or both.
  • Page 20 WALK MOWERS SERIES 3 Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety warnings. Read, Understand, and Follow all warnings and instructions in this manual, the engine manual, and on the machine, engine and attachments.

Table of Contents