Table of Contents
Advertisement
Package contents continued...
(2) 1/4"- 20 hex
1/4"- 20 flange hex nuts
nuts
(as required)
5/16" x 1 5/8" hex head lag screws
(as required)
5/16" x 1 5/8" tamper resistant Lag Screw
(as required)
(2) 1/4" x 2- 1/2" carriage bolts
Door Section identification
Door Height
Bottom
6'0"
18"
6'6"
21"
7'0"
21"
7'6"
18"
8'0"
21"
INTERMEDIATE I SECTION
Bottom Bracket warning
Astragal
4
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
(2) 3/8"- 16
hex nuts
1/4"- 20 x 9/16" track Bolts
(as required)
(2) 3/8"- 16 x 1-1/2" hex head
Bolts
Lock (second)
Intermediate (third)
18"
18"
18"
18"
21"
21"
18"
18"
18"
18"
Warning label
Labels
BOTTOM SECTION
5/16"- 18 hex nuts
(2) 3/8" - 16 x 3/4"
(as required)
Truss head bolts
(2) Cotter pins
(2) Clevis pins
(2) 5/16" Washers
(2) 1/4" x 2-3/4" carriage bolts
Intermediate II (fourth)
NA
NA
NA
18"
18"
When installing your door you must use sections of the appropri-
ate height in the right stacking order. What sections heights you
need to use in what order depends on the height of your door.
Unless your door is five sections in height, you will not receive an
Intermediate II section.
The boTTom SecTioN can be identified by the factory attached
bottom astragal and by the bottom bracket warning labels on
each end stile.
The iNTeRmeDiaTe i SecTioN may have a warning label
attached to either right or left hand endstile of the section. This
section is always the 3rd section from the bottom of the door.
1/4" - 14 x 7/8" Self drilling
screws (as required)
(2) 1/4"- 20 X 5/8" Tamper
resistant screws
5/16" x 2" tamper-resistant hex head Lag
Screws (as required)
Top
18"
18" OR
21"
21"
21"
18"
21"
Advertisement
Table of Contents
