Initiating Standby (Fn+F1) - HP Mini User Manual

Function
To use a hotkey command on the computer keyboard, follow either of these steps:

Initiating Standby (fn+f1)

Press
When Standby is initiated, your information is stored in memory, the screen is cleared, and power is
conserved. While the computer is in Standby, the power light blinks.
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Initiate Standby.
Switch the image.
Decrease screen brightness.
Increase screen brightness.
Initiate QuickLock.
Mute computer sound.
Decrease computer sound.
Increase computer sound.
Briefly press the fn key, and then briefly press the second key of the hotkey command.
– or –
Press and hold down the fn
release both keys at the same time.
fn+f1 to initiate Standby.
Hotkey
fn+f1
fn+f2
fn+f3
fn+f4
fn+f6
fn+f8
fn+f10
fn+f11
key, briefly press the second key of the hotkey command, and then
Using the keyboard 51