Handle Assembly - Kenmore 125.81714610 Use & Care Manual

1. Press the release button
to open the tool storage
cover.
Release
Button
2. Insert the Pet
PowerMate ®, press
down into place,
and close the tool
storage cover
securely.
[
Tool
Storage
Cover
HANDLE ASSEMBLY
A
Please pay special attention to these hazard alert boxes, and follow any instruc-
tions given. WARNING statements alert you to such dangers as fire, electric
shock, burns and personal injury. CAUTION statements alert you to such dangers
as personal injury and/or property damage.
Before assembling vacuum cleaner, check the PACKING LIST (page 2). Use this list to
verify that you have received and identified all the components of your new Kenmore
vacuum cleaner.
a
WARNING
Electrical Shock Hazard
DO NOT plug into electrical supply until
assembly is complete. Failure to do so
could result in electrical shock or injury.
PET POWERMATE®
This canister is equipped with an on-board
storage area for a Pet P owerMate ®
attachment.
POWERMATE®
Align wand and insert onto
PowerMateuntil the wand
locks into place.
Insert wand into
handle until lock
button snaps in
place.
To remove: Press
wand release button
and pull up on
handle.
To store: Disconnect
hose from wand
and canister to
prevent stress on
hose during storage.
Store hose in a
loosely coiled
position so the hose
covering is not
stressed.
sti
- 8 -