Assembly - Kenmore 153.14076810 Use & Care Manual

Assembly Step 1: Lid Handle and Hopper Lid Handle
Remove pre-attached washers and screws from Grill Barrel Lid Handle. Use them to attach Lid Handle (1)
to Lid (4) as shown.
Attach Hopper Lid Handle (19) to Hopper Lid (18) with two 5/32"-32 x 0.2" screws (F) and two washers (H)
as shown.
Assembly Step 2: Legs to Smoker
With the help of an assistant, carefully lay the smoker grill on its back on a non-abrasive surface.
Attach each leg as shown from the smoker grill sides with one 5/16" x 2.56" Bolt (A), one Spring Washer (C)
and one Washer (E).
Attach each leg as shown from the smoker grill front and back with one 5/16" x 1.77" Bolt (B), one Spring
Washer (C) and one Washer (E).
Note: Each leg will have an identification label as to its correct position for attachment to the smoker.
WARNING! The smoker grill is heavy. To avoid personal injury, obtain the help of an assistance to lay the
unit down and lift it back up.
6