Problem Solving - Electrolux 350 Series Owner's Manual

PROBLEM SOLVING

NOTE: Unplug the electrical cord before servicing.
PROBLEM
Appliance won't
start
Appliance won't
make steam
Appliance spits
water out of nozzle
Water boils out of fill
spout when adding
water.
Accessories will not
stay on.
General questions
CAUSE
√
Electric plug
√
No water in tank
√
No water in tank
√
Too much water in
tank. Do not overfill.
√
Unit positioned
upside down.
√
Not fully preheated.
√
Water tank too hot.
√
Not properly
installed.
√
Assembly or related
accessories
SOLUTION
Push plug securely into
outlet. Verify power on light
is on.
Try another outlet.
Check circuit breaker.
Check the tank for water.
Check the tank for water.
Check the water level in the
tank.
Use in upright position.
Allow more time for water to
heat up.
Allow more time for cooling.
Add water slowly.
Use special funnel provided.
Check for proper assembly.
Review this guide for
assembly instructions.
Please refer to your local
telephone directory for your
nearest Electrolux Service
Agent. If you reside in the
UK, you may contact the
Customer Care line 08706
055055. Know the Model
and Type numbers when you
call.
9