Problem Solving - Electrolux Enviro Multi Steamer Plus Owner's Manual

PROBLEM SOLVING

NOTE: Unplug the electrical cord before servicing.
PROBLEM
Appliance won't start.
Appliance spits water
out of nozzle.
Water boils out of fill spout
when adding water.
Accessories will not stay
on.
General questions.
CAUSE
Electric plug.
Too much water in tank. Do not
overfill.
Water condensed in wand and the
hose.
Not fully preheated.
Water tank too hot.
Not properly installed.
Assembly or related accessories.
Push plug securely into outlet. Verify power
on light is illuminated.
Try another outlet.
Check circuit breaker.
Check the water level in the tank.
Press steam delivery button and discharge
any water that has formed in wand and hose
into a container. As soon as the appliance is
supplying steam only, direct steam jet
towards the floor and press steam delivery
button at least two or three times.
Allow more time for water to heat up.
Allow more time for cooling.
Add water slowly.
Use special funnel provided.
Check for proper assembly.
Review this guide for assembly instructions.
For service, spares and advice in the UK,
please contact Electrolux Customer Care
on 08706 055 055. For service, spares or any
advice in other locations, please refer to your
local telephone directory for your nearest
Electrolux Service Agent.
9
SOLUTION