Optional Accesories; Source Features - Audiovox MMD85 User Manual

OPTIONAL ACCESSORIES
Wireless Headphones
The MMD85 includes a built in infrared transmitter for use with Movies 2 Go wireless
headphones (PN MMIRHS). Turning the Wireless Headphone switch ON will activate
the internal IR receiver and the volume can then be adjusted separately with the con-
trols on each headset. Any number of wireless headphones can be used, but all must
be within direct line of sight from the transmitter. See the documentation accompanying
your Movies 2 Go wireless headphones for more detailed information.
Wired Headphones
There are two 1/8" headphone jacks on the MMD85 that can be used with any stan-
dard wired stereo headphones. These jacks are controlled by the volume up/down but-
tons on the MMD85 remote control.
SOURCE FEATURE
AV1
The video input may be connected to a Video cassette Player (VCP), video game system,
or other audio/video devices. To access the A/V inputs, turn the MMD85 on and press
the source button on the MMD85 or the Source button on the remote control until "AV1
or AV2" is displayed on the screen. Turn the video source component on with its power
button or remote control. The MMD85 is now ready to play the audio and video signals
from the source connected to AV1 input.
AUX A/V Input
Using the supplied A/V Adapter Cable the MMD85 will accept an audio/video input
through the 1/8" jack located at the bottom right side of the screen. The audio/video
device could be a video game system, video camera, or other input device.
Video Out
The MMD85 provides a video output for optional video monitor(s). This output will pro-
vide a video signal that duplicates the signal displayed by the MMD85 to an additio-
nal monitor or video display. Please see your installer for more information.
53