Mitsubishi Electric PUHZ-SHW230YKA2 Service Manual page 46

SW2 setting
The number of connected indoor units
ON
1 2 3 4 5 6
Capacity setting display
ON
1 2 3 4 5 6
Outdoor unit setting information
ON
1 2 3 4 5 6
Pipe temperature/Liquid (TH2)
−39 to 88
ON
1 2 3 4 5 6
Actual flow water temperature (TH1)
8 to 39
ON
1 2 3 4 5 6
Pressure saturation temperature (T
−39 to 88
ON
1 2 3 4 5 6
OCH594B
Display detail
)
63HS
The black square (
Explanation for display
0 to 3
(The number of connected indoor units is displayed.)
Displayed as an outdoor capacity code.
Model Code
SHW230 40
• The tens digit (Total display for applied setting)
Setting details Display details
H·P / Cooling only 0 : H·P
Single phase / 3 phase 0 : Single phase 2 : 3 phase
• The ones digit
Setting details Display details
Defrosting switch 0 : Normal
(Example) When heat pump, 3 phase and defrosting
(normal) are set up, "20" is displayed.
−39 to 88
(When the temperature is 0: or less, "–" and
temperature are displayed by turns.)
8 to 39
−39 to 88
(When the temperature is 0: or less, "–" and
temperature are displayed by turns.)
46
■
) indicates a switch position.
Unit
Unit
Code
display
1 : Cooling only
Code
display
1 : For high humidity
:
:
: