Nokia 6136 User Manual page 60

S e t t i n g s
Closed user group — to specify a group of people whom you can call and who can
call you (network service)
Security level > Phone — the phone asks for the security code whenever a new
SIM card is inserted into the phone. Select
security code when the SIM card's memory is selected and you want to change
the memory in use.
Access codes — to set the PIN code or UPIN code in use, or to change the security
code, PIN code, UPIN code, PIN2 code, and call restrictions password
Code in use — to select whether the PIN code or UPIN code should be active
Authority certificates or User certificates
user certificates downloaded into your phone. See "Certificates," p. 85.
Security module settings — to view
PIN request, or change the module PIN and signing PIN. See also "Access codes,"
p. 8.
Restore factory settings
To reset some of the menu settings to their original values, select
Settings > Restore settings and enter the security code. Data that you have
entered or downloaded is not deleted. For example, names and numbers in
Contacts are not affected.
Phone software updates
You may initiate phone software updates from the
your service provider may initiate the updates by sending them over the air
directly to your device. This function is known as firmware over the air (FOTA).
Warning: If you start a software update, you cannot use the device,
even to make emergency calls, until the update is completed and the
device is restarted. Be sure to back up data before accepting a FOTA
update.
Settings
To select whether to allow phone software updates initiated by your service
provider, select Menu > Settings
Service provider software updates
Always allow — to perform all software downloads and updates automatically
60
Memory and the phone asks for the
— to view the list of the authority or
Security module details, activate
Phone updates
> Configuration > Device manager settings
and one of the following options:
Module
Menu >
menu. Also,
>