Nokia 6136 User Manual page 53

Infrared
You can set up the phone to send and receive data through its infrared (IR) port.
To use an IR connection, the device with which you want to establish a
connection must be IrDA compliant. You can send or receive data to or from a
compatible phone or data device (for example, a computer) through the IR port of
your phone.
Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with
other IR devices. This device is a Class 1 laser product.
When sending or receiving data, ensure that the IR ports of the sending and
receiving devices are pointing at each other and that there are no obstructions
between the devices.
To activate the IR port of your phone, select
Infrared.
To deactivate the IR connection, select
Infrared. When the phone displays
If data transfer is not started within two minutes after the activation of the IR
port, the connection is canceled and must be started again.
IR connection indicator
When is shown continuously, the IR connection is activated, and your
phone is ready to send or receive data through its IR port.
When blinks, your phone is trying to connect to the other device, or a
connection has been lost.
Packet data
General packet radio service (GPRS) is a network service that allows mobile
phones to send and receive data over an Internet protocol (IP) based network.
GPRS is a data bearer that enables wireless access to data networks such as the
Internet.
Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For
more information on availability of EGPRS or GPRS and data transfer speed,
contact your network operator or service provider.
The applications that may use EGPRS or GPRS are MMS, video streaming,
browsing sessions, remote SyncML, Java application downloading, and the PC
dial-up.
Menu > Settings > Connectivity
Menu > Settings > Connectivity
Deactivate infrared?, select Yes.
S e t t i n g s
>
>
53