LG Vodafone L600V User Manual page 79

Settings
PIN code change procedure
1. Select 'PIN code' from the 'Change
password' list and then press [OK].
2. Input the current PIN code, and press
[OK].
3. Input the new PIN code, and press [OK].
4. Input the new PIN code once again, and
press [OK].
- If the PIN code is different from that of
step 3, the procedure is restarted from
step 3.
5. When the PIN code is properly changed, a
"Changed" message is displayed. With an
incorrect PIN code input in step 2, the
procedure is restarted from step 2, and
the remaining allowed number of input
attempts is decreased by 1.
6. Press the C key in the PIN code input
window to return to the previous step.
78
Note
] Three incorrect PIN code entries in the
PIN code input window would invalidate
the PIN code. In this case, you have to
input the PUK (PIN Unblock Key) code
to configure the PIN code again. The
maximum allowed number of attempts of
PUK code input is 10 times.
ATTENTION: after having entered 10
times an incorrect PUK code, the USIM
card will be blocked and must be
replaced.
PIN2 code
PIN2 is the abbreviation of Personal
Identification Number 2, and is used to
restrict the use of unauthenticated users like
PIN. The PIN2 code change procedure is the
same as the one for the PIN code. 3
incorrect PIN2 code entries would invalidate
the PIN2 code. In this case, you have to
input the PUK2 code in order to use the
PIN2 code again. The maximum allowed
number of attempts of PUK2 code input is
10 times, like PUK1. 10 incorrect PUK2 code
entries would invalidate the PIN2 code.