Vax S5-CM User Manual page 7

S5-CM Kitchen & Bathroom Complete Master UG Comp31.03.14_User guide 31/03/2014 15:04 Page 6
Operation
Floor head (dependant on model)
IMPORTANT: Please refer to floor manufacturer's care recommendations before use and test the steamer on a
discrete area of flooring to begin with.
Attach extension tube to triangular
floor head.
Place floor head (with microfibre pad
attached) into carpet glider.
Attaching small tools
6
Place the product on top of the microfibre
pad. The blue face should be in contact
with the floor.
Move the steamer slowly backwards and
forwards paying particular attention to
high traffic areas.
Access to built in accessories:
The steamer is fitted with a series of
built-in accessories stored on both sides
of the unit's main body. To access,
squeeze tab at top of door to open.
Attaching accessories:
1 Push small tools onto concentration
nozzle, aligning arrows.
Twist clockwise to fit.
Vax Careline: (UK) 0844 412 8455
When cleaning hard floors, move the
steamer slowly backwards and forwards
paying particular attention to high traffic
areas. Squeeze/release trigger as required.
NOTE: Concentration nozzle must be attached
to the gun before fitting the tools.
1 2
(ROI) 1-800 928 308