Advertisement
Assembly (continued)
5
Installing the supportive plates
□ Position the two supportive plates (H) onto the top of the
assembly as shown.
□ Secure the assembly using eight screws (AA). Screw six
of the screws in from the top into the bottom, as shown.
Screw the last two screws from the bottom and up into the
assembly, as shown.
7
Attaching the big drawer and the
power outlet
□ Slide the big drawer (J) into the assembly, as shown.
□ Attach the power outlet (S) to the assembly using tapping
screws (CC), as shown.
6
Attaching the side boards for the
drawers
□ Attach a side board (I) on each side of the assembly using
screws (AA), as shown.
8
Attaching the grid board
□ Attach the grid board (K) to both sides of the assembly using
screws (AA), as shown.
□ Place the three protective rings (P) onto the assembly, as
shown.
6
Advertisement
