Download Print this page

Warranty; Pre-Assembly - Husky TSA4524 Use And Care Manual

Deluxe work bench

Advertisement

Warranty

WHAT IS COVERED
The manufacturer warrants the product to be free from defects in materials and workmanship for a period of three (3) years from date
of purchase. This warranty applies only to the original consumer and only to products used in normal use and service. If this product is
found to be defective, the manufacturer's only obligation, and your exclusive remedy, is the repair or replacement of the product at the
manufacturer's discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration
neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any
way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of
an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This
warranty shall not apply to the finish on any portion of the products such as surface and/or weathering, as this is considered normal wear
and tear.
The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose,
other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential
or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-888-HD-HUSKY or visit www.HUSKYTOOLS.com.

Pre-Assembly

PLANNING INSTALLATION
Compare all parts with the Hardware Included and Package Contents lists. If any part appears missing or damaged, do not use this
product. Contact Customer Service at 1-855-HD-HUSKY.
MAXIMUM WEIGHT CAPACITIES
Removable top tray
Wooden top
Small drawer
Big drawer
Bottom tray
Total capacity
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part
Description
AA
Screw ST6.3x12
BB
Screw ST5x12
CC
Pan head tapping screw ST4.2x12
DD
Bolt M6x16 for caster
EE
Washer Ø6 for caster
FF
Hex nut M6 for caster
10 lbs. x 3 = 30 lbs.
220 lbs.
100 lbs. x 2 = 200 lbs.
100 lbs.
132 lbs.
679 lbs.
Quantity
64+2
3
6
16+1
16+1
16+1
TOOLS REQUIRED
AA
DD
3
Please contact 1-888-HD-HUSKY for further assistance.
Phillips
screwdriver
BB
EE
FF
HUSKYTOOLS.COM
CC

Advertisement

loading