Lift Variations When Using Attachments; Attaching A Trailer - Snapper 1600 Series Operator's Manual

Lift Variations When Using
Attachments
When a front-mounted attachment such as a
snowthrower or dozer blade is used with the tractor, the
lift mechanism must be locked to provide downward
force. When the mower is reinstalled the downward
pressure lock must be released so that the mower can
float.
Manual Lift Models
NOTE: These instructions apply to Broadmoor / 300 /
1600 / 2600 Series tractors equipped with a lift lever kit.
The lift link is installed differently depending on what
attachment is being used. Refer to Figure 8 for link
installation information.

Attaching a Trailer

The maximum horizontal drawbar force allowed is 444
Newton. The maximum vertical drawbar force is 222
Newton. This equates to a 396 lbs (180 kg) trailer on a
10 degree hill. Secure the trailer with an appropriately
sized clevis pin (A, Figure 9) and clip (B).
Snowthrower
& Dozer
Applications
A
Mower
Applications
A
F
Figure 8. Lift Link - Manual Lift Models
A. Pin
B. Rear Hole of Lift Bar (Snowthrower Applications)
C. Spacer
D. Hair Pin Clip
E. Upper Hole (Snowthrower Applications)
F. Slot of Lift Link (Mower Applications)
G. Lower Hole (Mower Applications)
A
3'4"
(1m)
Figure 9. Trailer Weight Recommendations
A. Clevis Pin
B. Clip
17
Operating the Tractor
C D
B
D
C
B
20' (6m)
E
G
10˚