AEG SANTO 70398-28 DT Operating Instructions Manual page 27

Reassemble the upper door.
13 Fix the left upper hinge (pro-
vided with the internal featu-
res).
14 Unscrew the handle fixing
screws starting from "B"
(both doors).
Remove the plastic hole
covers and reposition on
the opposite side.
Refit the handle on the
opposite side and fix the
screws starting from "A".
Attention:
After having reversed the opening direction of the doors check that all the
screws are properly tightened and that the magnetic seal adheres to the
cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may
not fit perfectly to the cabinet. in that case, wait for the natural fitting of
the gasket or accelerate this process by heating up the part involved with a
normal hairdrier.
A
B
27