Philips 868 User Manual page 68

entered within 10 tries, you will be prompt to enter the new PIN code. In case the number
of tries exceeds 10 times, the SIM will be blocked and the screen will prompt "SIM not
usable."
Edit PIN2 code
To edit PIN2, you can move the cursor to Edit PIN2, and the screen will display the
following prompt message:"Enter old PIN2, Left times: 3". If the correct old PIN2 code
has been entered within 3 tries, the screen will display the following prompt message:
"Enter new PIN2", and the "Re-enter" for entering the new PIN2 code again. After
re-enter the new PIN2 code, user can press [OK] to save new PIN2 code and exit the
PIN2 code editing screen.
If the correct old PIN2 code has not been entered with 3 tries, the screen will display
following prompt:"Enter PUK2, Left times: 10".If the correct PUK2 number has been
entered within 10 tries, you will be prompt to enter the new PIN2 code. In case the
number of tries exceeds 10 times, the PIN2 code is blocked and the functions related to
PIN2 code will be unaccessible.
Shortcuts
Instead of entering the various menus and browsing the lists, you can set up direct access to a
specific function by linking it to a key.
Right soft key
You can change the definitions for the right soft key:
press 3/4 to change the setting, or
press the left soft key [Select] to display a function list, select a function and press [OK].
Navigation keys
You can change the definitions for the four directions on the navigation key. Scroll to Up, Down,
Left or Right, indicated by an arrow, and then:
press 3/4 to change the setting, or
press the left soft key [Select] to display a function list, select a function and press [OK].
Hotkeys
You can only program keys 2 to 9 as 0 (select language),1 (call voice mailbags), # (access
WAP) and * (enter international prefix) are predefined and locked, preventing reprogramming.
Depending on your service provider, other hotkeys may be predefined and locked.
1 Select a key from 2 to 9 and press the left soft key [Edit].
2 Browse the list to select the function you wish to associate with the selected number key.
Press the left soft key, to confirm your choice.
To use the hotkeys, simply press and hold the key corresponding to the function you want to
launch or to the number you want to dial while in idle mode.
Memory status
This menu allows you to view the current memory status of the phone memory and the
external memory card by way of bar type figure and text prompts.
- phone memory: used memory/total memory
- memory card: used memory/total memory
Philips 868 User Guide
Page 68 of 89