Adjusting The Backlight; Hiding Or Showing Location Information - Motorola RAZR V3C User Manual

Adjusting the Backlight

Set the amount of time that the display and
keypad backlights remain on, or turn off
backlights to extend battery life.
Find the MENU (s)
Feature
Hiding or Showing
Location Information
Your phone can use the automatic
location information (ALI) feature to
032380o
tell the network where you are
physically located.
When ALI is set to Location On , your phone
displays the O (ALI on) indicator. Services
may use your known location to provide
useful information (for example, driving
directions, or the location of the nearest
D SETTINGS & TOOLS
Initial Setup
Backlight
bank). Your phone prompts you when the
network or a service asks for your location.
You can refuse at this point.
When ALI is set to 911 Only , your phone
displays the P (ALI off) indicator, and the
phone does not send location information
unless you call the emergency phone number
(such as 911).
Find the (s)
MENU
Feature
1 When prompted, enter the location code.
2 Scroll to Location On or E911 Only .
3 Press OK (s) to select the setting.
Limitations of AGPS
Sometimes adequate signals from multiple
satellites are unavailable, usually because
your AGPS phone's antenna cannot establish
a view of a wide area of open sky. In these
Setting Up Your Phone
D SETTINGS & TOOLS
System Location
43