Installation - Motorola FXC-851 User Manual

INSTALLATION

[ 1 ] Plugging AC/DC Adapter in to Cradle
Connect the adaptor to Cradle.
[ 2 ] Plugging AC/DC Adapter
Connect the adaptor to AC Wall outlet.
[ 3 ] Plugging Cradle
Put the phone on the Cradle.
[ 4 ] SIM Card and battery installation in the handset
1) Remove the battery cover.
2) Insert SIM card into the SIM slot in the right direction
3) Connect the rechargeable battery pack into the battery plug
4) Replace the battery door.
1
3
13
2
2
4
[5] Turning Phone's Power On/Off
After installing the handset correctly, press the power key which is on the
right of the front panel for about 3 seconds, the phone will then
automatically test whether the SIM Card is inserted and valid. Wait for the
antenna icon to display indicator bars before you make a call.
1) When the battery icon is empty, put the phone on the Cradle
connecting tothe external power adapter.
2) Plug the external power adapter into the power socket. The unit will
power up automatically.
3) Check the cellular signal strength and move the unit until the best signal
possible is achieved.
4) In state of power-on, press and hold power key button, LCD screen
closes.
Note:
The battery pack is a backup for emergencies in case of a power failure.
Do not operate the phone without having AC/DC adaptor connected.
Be sure to carefully match the positive and negative terminals as shown
on the battery. When using the phone for the first time, charge it for over 6
hours to ensure optimum battery charge.
Caution:
It is prohibited to use the SIM card for this Fixed Wireless Phone in other
GSM phone. Once the SIM pin number is entered, the SIM pin maybe
automatically changed so the initial PIN is no longer valid. Therefore, it is
highly recommended
NOT to take out the SIM card once it is installed in this product.
DO NOT bend or scratch your SIM card, and avoid exposing it to static
electricity, water, or dirt.
14