Table of Contents
Advertisement
7. THERMAL DISSIPATION
Stack installation
To ensure the cooling environment, please meet the following condition.
The first time cleaning of strainer mesh should be right after
installation. Recommend to clean the strainer mesh quarerly.
Pease do not run the product without the dust filter, or it makes
the service life of the product shorten.
Such condition will be considered as no warranty.
To avoid heat protection
To prevent the hot air back to frong airvent.
Install exhaust blower
take the hot air away.
NOTES:
Keep hot air will not flow
back to the front air vent.
R
A I
T
H O
NOTES:
The ambient temperature should
be lower than 35℃ while running
the amplifier.
NOTES:
In order to have a good heat
dissipation condition for amplifier
please clean the filter after you
finish your install, because the
dust in filter will stop the air vent,
it's not good for the heat
dissipation. And you should clean
the filter net every month.
NOTES:
Try your best to keep the
temperature under 35℃ even in
extreme condition.
NOTES:
If use in Non-horizontal stack, we
suggest the rear exhaust outlet
up or straight to the vents of the
room.
9
Advertisement
Table of Contents
