Toa DA-1000F Operating Instructions Manual page 6

[Rear]
⑥
6. Socket with fuse
Connects to power source with AC power supply cord.
The Standard Voltage : AC 100 ~ 240V.
Dissipation Power : 2000W.
Fuse ratings: T16AL 250V.
7. Ventilation hole
8. Speaker output terminal
Speaker output, Speakon ( NL4 ) terminal.
Connects to speakers. Refer to p.7 and p.8.
9. Signal input
20kΩ (balanced) / 10kΩ (unbalanced),
XLR-F connector.
Connects to Signal source.
10. Sensitivity selector switch
Selects the input sensitivity of input as follows: 0.775 / 1.0V / 32dB*
11. Link mode selector switch
Selects the Link mode of input as follows: 1 in 4 / 2 in 4.
Refer to p.8.
12. Mode selector switch
Selects the mode of input as follows: Bridge / Parallel / Stereo.
Refer to p.8.
13. Signal output (LINK)
XLR-M connector.
Connects to another one input terminal of the power amplifier.
Refer to p.7.
6
⑦ ⑧ ⑨
⑬
⑩
⑫ ⑪