Table of Contents
Advertisement
entry modes
j or g Your Primary text entry mode can
be set to any iTAP® j or tap g
mode.
p or m Your Secondary text entry mode can
be set to any iTAP p or tap m
mode, or set to None if you don't
want a secondary entry mode.
W
Numeric mode enters numbers only.
[
Symbol mode enters symbols only.
To set your primary and secondary text entry
modes, press Options > Entry Setup in a text entry
view and select Primary Setup or Secondary Setup.
Tip: WANT TO SHOUT YOUR MESSAGE?
Press 0 in a text entry view to change text
case to all capital letters (T), no capitals
(U), or next letter capital (V).
iTAP® mode
Press # in a text entry view to switch to
iTAP mode. If you don't see j or p, press
Options > Entry Setup to set iTAP mode as your
primary or secondary text entry mode.
iTAP mode lets you enter words using one
keypress per letter. The iTAP software
combines your keypresses into common
words, and predicts each word as you enter it.
basics
21
Advertisement
Table of Contents
