Emerson Rosemount 8750W Reference Manual page 68

Operation
Diagnostics
Basic Config The basic config buttons provide direct access to the most common
Menu
Navigation
64
The diagnostics buttons provide direct access to the advanced diagnostic
functions of the transmitter and meter verification.
—ADV DIAG. Access the advanced diagnostic menu.
—METER VERIFY. Run Meter Verification.
transmitter parameters.
—SENSOR CAL NO. Access the sensor calibration number
parameter. Press , , and
Press to store the new value as the sensor calibration number.
—SENSOR SIZE. Access the Line Size parameter. Press
select the sensor line size. Press
store the new value as the sensor line size.
—FLOW UNITS. Access the Flow Units parameter. Press
select the flow units. Press
store the selection.
—RANGE. Access the PV URV parameter. Press , , and
modify the upper range value. Press
Upper Range Value.
The menu navigation buttons enable you to move the display cursor,
incrementally increase the value, enter the selected value, display the
home screen, or access the transmitter menu.
—HOME/FLOW RATE. Access the flow rate display screen.
—XMTR MENU. Access the transmitter menu structure.
—(Up). Increment a numerical or list value.
—(Left) or E. Back out or enter/store parameters to the transmitter
memory.
—(Down). Decrement a numerical or list value.
—(Right). Highlight a numerical or text character, or increment a
list value.
®
Rosemount 8750W Transmitter with Modbus Protocol Reference Manual
to modify the sensor calibration number.
to increment the line size. Press
to increment the flow units. Press
to store the new value as the PV
or to
to
or to
will
to