Installing The Sensor Module - Toro Wireless RainSensor TWRS Installation And Operation Manual

Doc 5 12/21/04 6:36 PM

Installing the Sensor Module

1. The sensor module should be mounted vertically with the antenna wire
extending straight down. Avoid installations where the antenna wire would
contact any metal object.
Figure 7A
Do not over-tighten
thumbscrew
A rain gutter is an ideal location for the sensor module. Simply position the
bracket with the thumbscrew under the gutter lip and tighten to secure (do not
over-tighten) See Figure 7A.
Figure 7 B
The sensor module can also be mounted on any suitable solid structure such
as the side of the roof, a shed or fence using the two supplied stainless steel
screws. See Figure 7B.
2. Once securely fastened, adjust the sensor module on the mounting bracket as
needed to align the sensor module housing vertically.
Page 5
Press and hold
down to test
Rain gutter (cross section view)
Extended Antenna
straight down
Extended Antenna
straight down
Stainless
Steel
Screws
5