Preparing The Transmitter - Sony HWS-AV10K Operating Instructions Manual

Preparing the transmitter

Connect the A/V equipment in the main room to the transmitter and then turn on the
transmitter. If you want to operate the A/V equipment connected with the transmitter from
another room, see "Installing the IR Blaster" (page 13) to set the IR Blaster.
2
CHANNEL
VIDEO IN
LEFT
AUDIO
OUT
RIGHT
IR
EXTENDER
DC IN 6V
1
Connect the A/V equipment's output jacks in the main room to the
transmitter's VIDEO/AUDIO IN jacks with the A/V cable (supplied).
2
Set the CHANNEL switch to the top.
Important
Make sure to set the CHANNEL switch of the transmitter and receiver to the same position.
3
Connect the AC power adaptor to the transmitter.
4
Connect the AC power adaptor to the wall outlet.
5
Press the POWER button on the front of the transmitter to turn it on.
The power indicator on the front of the transmitter lights green.
Notes
• Use only the recommended AC power adaptor manufactured by Sony. Polarity of the plugs of other
manufacturers may be different.
• If you connect a DVD player to the transmitter via a VCR, the VCR's copy guard function may distort
or dim the DVD picture. In this case connect the DVD player directly to the VIDEO/AUDIO IN jack on
the transmitter.
8 US
CHANNEL
1
IR Blaster (supplied)*
3
A/V equipment
OUT PUT
R AUDIO L VIDEO
For details about
installing the IR Blaster,
see "Installing the IR
Blaster" (page 13).
4
5
* Do not connect the other of supplied IR Blaster.