LG HBS-110 User Manual page 3

Power on
- Press and hold the PWR/END key 2 seconds.
✓
The power will turn on and a tone will play.
- When turning on the Power initially after purchase, the headset will enter to the "Pairing
Mode" automatically.
- The screen will display "LG HBS-110".
✓
When there is no operation for 15 seconds, the LCD will turn off and the headset will
enter Power Saving mode.
- When the PWR/END key is pressed with the HOLD switch on, "LOCKED" will be displayed
on the screen.
✓
A sharp beep will sound and the power will be turned off.
Power off
- Press and hold the PWR/END key for 5 seconds.
✓
A shutdown tone will play , the Bluetooth link will be disconnected, and the power will be
turned off.
- "Power off" is displayed on the screen for 2 seconds
Charging
- Remove the cover for the power connector and connect the charger to the power port.
- When the charger is connected with power on or off , the LCD displays "charging" along
with the animated battery icon to indicate that the battery is being charged.
- The LCD will turn off after 15 second and turn back on when the user press any key.
- The keys will not function while the device is charging
- It takes 3 hours to fully charge the headset.
- "Battery full" is displayed on the screen when charging is complete.
Low battery
- The battery Icon on the LCD will blink when the battery power is low.
- When battery is not charged, the LCD will display "Low Battery" and then turn off.
- In this case, the battery needs to be charged.
-4-
Pairing
- After turning on the HBS-110, press and hold the PLAY/PAUSE button for more than 5
seconds.
✓
You will hear 2 beeps, then a melody, and the screen will display "Pairing Mode".
- When turning on the Power initially after purchase, the headset will enter to the "Pairing
Mode" automatically.
Using your handset, find the Bluetooth Menu and "search for" or "add" new devices.
Select "LG HBS-110" from the list of devices and pair it with your handset.
✓
When asked for the Pass/PIN code during the pairing procedure, please enter "0000"
(4 Zeros).
✓
Once pairing has completed successfully, you will hear a beep.
After pairing successfully, be sure to "Connect" to the HBS-110.
- When the stereo profile is connected, the LCD will display "
- When the handsfree profile is connected, the LCD will display "
- If you want to pair with other devices in the future, the headset must be in Pairing Mode.
When only the handsfree profile is connected, music cannot be played in the headset.
To cancel Pairing Mode, press the PLAY/PAUSE button more than five seconds.
If the headset is not paired to another Bluetooth device within 3 minutes, it will
automatically return to standby mode.
Connecting
[ Call connection]
- Briefly press the PWR/END key to access Voice Command. (Your handset MUST support
this feature).
✓
Press the PWR/END key again to return to the main screen.
✓
Press the PWR/END key for 2 seconds to access Last Number Redial. (Your handset
MUST support this feature).
- When you end a call, the screen will display "Call Ended" and the call will be terminated.
[ Auto Reconnect ]
- When the HBS-110 and your handset are separated by a distance of 33 feet(10meters) or
more, the headset will display "Disconnected", followed by "Out of Range". When the
handset and HBS-110 are brought back within the required distance, the HBS-110 will
automatically reconnect with the handset.
".
".
-5-