10 hours or daily Service
Chain and bar system - Lubricate [25807955]
Conveyor chain
Oil the conveyor chain through the access hole (1)
while running the machine idle every 10 hours of use
and after storage.
Lubricate the conveyor chain immediately after oper-
ation while it is still warm and let the machine run idle
for a short period to ensure effective oil penetration
resulting in longer life using these guidelines.
Run the machine at low idle speed for
•
oiling the chain. Ensure there is a second
person in the tractor to shut the tractor
PTO and engine off in case of emergency.
Engage the tractor handbrake. Close and
latch all baler guards and the tailgate.
Keep at a safe distance from the machine
in particular the ground wheels.
Oil at the end of the workday while the
•
chain is still warm and let the machine run
idle for a short period to ensure effective
oil penetration, oil both sides equally.
NOTICE: In abrasive sandy conditions it is better to run
the chains dry (not to oil on a daily basis). however oil
abundantly before and between seasons, storage periods
and prior to starting the new season.
Front hitch [25808567]
Ball hitch
7 - MAINTENANCE
7 - 28
1
ZIL10FCRB844AAA
1
ZIL10FCRB811AAA