Important Safety Instructions - Dish Network Hopper 3 User Manual

Important Safety Instructions

1
Read these instructions.
2
Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use the apparatus near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus(includingamplifiers)thatproduceheat.
9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
yoursafety.Iftheprovidedplugdoesnotfitintoyouroutlet,consultanelectricianfor
replacement of the obsolete outlet.
10
Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11 Onlyuseattachments/accessoriesspecifiedbythemanufacturer.
12 Unplug the apparatus during lightning storms or when unused for long periods of time.
13 Referallservicingtoqualifiedservicepersonnel.Servicingisrequiredwhenthe
apparatus has been damaged in any way, such as the power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into it, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
14 The power plug must be readily accessible so that the apparatus can be easily
disconnected from the AC power.
15 The receiver is still connected to the AC power whenever it is plugged into a live
power outlet, even if it is turned off using the remote control or front panel buttons.
16 Noflamesources,suchaslitcandles,shouldbeplacedontheequipment.
17 Theapparatusshallnotbeexposedtodrippingorsplashing,andnoobjectsfilledwith
liquids, such as vases, shall be placed on the top of it.
18 Use only the power supply provided with the receiver. Unplug the receiver's power
cord by gripping the power plug, not the cord.
19 Donotoverloadwalloutletsorextensioncords;thiscanresultinariskoffireor
electrical shock.
20 Never insert objects of any kind into the receiver through openings, as the objects
maytouchdangerousvoltagepointsorshortoutparts.Thiscouldcausefireor
electrical shock.
21 Do not locate the antenna near overhead light or power circuits, or where it can fall
into such power lines or circuits. When installing the antenna, take extreme care to
avoid touching such power lines or circuits, as contact with them can be fatal.
IV
Hopper_3_UserGuide.indd 4 8/17/2015 1:05:30 PM