Reset The Device To Factory-Default Settings - Watchguard Firebox T10 Quick Start Manual

Reset the Device to Factory-Default Settings

If you ever need to, you can restore your Firebox to its factory-default settings. For
example, if you do not know the administrator account passphrase or you want to start
over with RapidDeploy QuickStart, you can reset your device. Make sure you back up your
configuration before you upgrade. The configuration can be restored if necessary.
1. Power off the device.
2. Press and hold the Reset button on the back of the device.
3. Power on the device while you continue to depress the Reset button.
4. Continue to depress the button until the Attn indicator stays lit.
This process can take 75 seconds or more.
5. Power off the device.
6. Power on the device.
The Power indicator is lit and your device is reset.
8
激活设备
1. 转到 www.watchguard.com/activate
2. 登录到您的 WatchGuard 帐户，或者创建一个新帐户*。
*如果创建新帐户，请在完成帐户创建过程之后返回到 www.watchguard.com/activate 。
3. 输入设备的序列号。
4. 在激活期间，选择安装方法：
• 快速部署 – 自动下载快速部署配置文件并将其应用到您的设备，其中预配置了
WatchGuard 推荐的安全设置。
• 常规激活
– 使用网页安装向导为您的设备创建基本配置。
5. 请根据您的实际安装方法选择本手册中对应的安装说明。
9