ActionTec VOSKY UP101 User Manual page 20

Actiontec VoSKY Internet Phone Wizard User Manual
Connecting to a DSL Splitter
If the telephone is connected to the phone line via a wall
mount DSL filter, follow this procedure to connect IPW:
1. Use the supplied phone cable and insert one end in the "Line"
port of IPW.
2. Insert the other end of the supplied phone cable in the "Phone"
port of the DSL filter.
3. Get the phone cable from the telephone and insert one end in
the "Phone" port on the rear panel of IPW.
4. Connect the other end of the phone cable to the telephone. The
components should be connected similarly to the figure below:
Internet Phone Wizard
IPW is connected in Dual-Line mode. Next, go to chapter 4, "In-
stalling IPW Software".
Phone W
1