Loading Disc - HP H110UI1 User Manual

The External ODD (Optional)
7.2 Loading Discs
ODD Indicator
Follow the steps below to load a disc.
1. When the system is powered on, press the eject button to open the disc tray.
2. Gently grasp and pull the disc tray until it is full opened.
3. Put the disc in the disc tray with the label side facing up.
4. Gently push the center of the disc tray until it locks into place.
Follow the steps below to remove discs:
1. Press the eject button and wait for the disc tray to partially open (when the ODD
indicator is off). Gently pull the disc tray out until it is full opened.
2. Gently unlock and lift the disc out of the disc tray.
3. Gently push the center of the disc tray until it locks into place.
Note:
Press the eject button will not open the disc tray when the system is off. In this
case, you can open the disc tray by inserting a paper clip into the emergency hole
next to the eject button.
Note:
If the disc is not seated properly when the disc tray is closed, the disc might be
damaged, and the disc tray might not open fully when you press the eject button.
Page 7-2
Emergency Hole
Eject Button
User's Guide