Advertisement
Installation Guide
The procedure for installing the management program depends on the operating
system installed on your PC. The following section takes Windows XP as an
example.
Installing the M3710
1.
Connect the M3710 to the PC and enable the modem.
2.
The OS automatically detects and recognizes new hardware and starts the
installation wizard.
If the auto-run program does not respond, find the AutoRun.exe file in the
driver path. Then double-click AutoRun.exe to run the program.
3.
Follow the prompts of the installation wizard.
4.
After the program is installed, the shortcut icon of the management program
is displayed on the desktop.
Note:
Do not disconnect the M3710 during the installation process.
Launching the Management Program
After the M3710 is installed, the management program is launched automatically.
Then every time the M3710 is connected to the PC and the modem is enabled, the
management program is launched automatically.
You can also double-click the shortcut icon on the desktop to launch the
management program when the modem is enabled.
Note:
9
Advertisement
