Chapter 5. Running The Verification Tests - IBM 5291 1 Operator's Manual

Chapter 5. Running the Verification Tests
The verification tests check out the functions of work stations.
Throughout these tests, you are required to make selections from a menu. If
you make a selection error, the tests will not proceed. To recover from a
selection error, you can:
• Backspace and enter the correct selection over the incorrect one (if you have
not yet pressed the Enter / Rec Adv key).
• Press the C and Enter / Rec Adv keys. This will return you to the Prime
Option Menu, where you can make another selection.
Do the following to run the verification tests:
1. If necessary, start communications with the host system.
2. When the sign-on screen is displayed, press the Cmd key.
3. Press the Test Request (Character Backspace) key.
The following Prime Option Menu is displayed.
Note: The exact format of the display screens might vary from host system to
host system.
PRIME OPTION MENU SELECT OPTION DISPLAY AS
C END 3 CONFIGURATION DATA
1 DISPLAY VERIFICATION 4 ERAP
2 WORK STATION PRINTER VERIFICATION
USE THE FOLLOWING LINES TO VERIFY CORRECT OPERATION OF KEYBOARD DATA KEYS
Running the Verification Tests 5-1