Acer NA23WABAS Service Manual page 56

1A1D1H
Hardware Configuration:(Writing EDID for
1. Connect the PRINTER PLUG of DDC FIXTURE with the
printer port of Desktop PC.
2. Plug USB A PLUG of DDC FIXTURE to USB socket of
Desktop PC
3 Use DVI cable connect to the DVI socket of monitor
of DDC FIXTURE.
4 Take a video cable then connect the D-SUB PLUG and the
D-sub socket of monitor.
5. Re-confirm all the connectors are connected well.
DVI CONNECTION
VGA CONNECTION
Entering Factory mole to let "EDID WP" be off
Writing EDID procedure for
S1 Choose the folder "ACER-VGA&DVI-DDC"
Double click " AcerDigedid "
The writing process same as writing 1A process.
S2 When EDID was written successfully that will show below
message on the screen
7. Writing EDID Process
VGA's and DVI port's
PARALLEL CONNECTION
USB CONNECTION
1A1D1H
Hardware Configuration:(Writing EDID for
)
1. Connect the PRINTER PLUG of DDC FIXTURE with the
printer port of Desktop PC.
2. Plug USB A PLUG of DDC FIXTURE to USB socket of
Desktop PC
3 Use DVI transfer HDMI cable connect between of the DVI
EXTENDING SOCKET and Monitor(Writing EDID for HDMI
port)
4 Take a video cable then connect the D-SUB PLUG and the
D-sub socket of monitor.
5. Re-confirm all the connectors are connected well.
VGA CONNECTION
Entering Factory mole to let "EDID WP" be off
Writing EDID procedure for
S1 Choose the folder "ACER-HDMI -DDC"
Double click " Acer 24-HDMI "
The writing process same as writing 1A process.
S2 When EDID was written successfully that will show below
message on the screen
ACER V233H
Go to cover page
HDMI port's )
PARALLEL CONNECTION
USB CONNECTION
HDMI TRANSFER DVI CONNECTION
1A1D1H
55