Acer NA23WABAS Service Manual page 26

Hold one side of down side that had been
S13
separated from front bezel
Use properly force to pull up front bezel
Use a Phillips-head screwdriver unscrew 2 screws
S14
to release function key board.
(No1~2 Screw Size=M0.9x1; Torque=0.9~1.1
KGFxCM).
1
Use a Hex-head screwdriver unscrewed 4 screws
S15
to release the DVI and D-SUB connectors
(No1~4Hex Nut screws
Size=M3x8;Torque=4.5~6.5KGFxCM).
4
4. Assembly and Disassembly Procedures (continued)
2
1
2
3
Use a Phillips-head screwdriver unscrewed the
S16
No.1~2 screws to release the power connector.
(No1~2 screw size=M3x10; Torque=7.5~9.5
KGFxCM).
2
Use a Phillips-head screwdriver unscrewed the
S17
No.1~4 screws
(No1~4 screw size=M3x5; Torque=2.5~3 KGFxCM).
2
4
Disconnect the lamps cable
S18
Take out lamp cables right through the No.1-2
square holes and separate the bracket chassis
1
25
ACER V233H
Go to cover page
1
1
3
2