Smeg CS19ID-6 Instructions For Installation And Use Manual page 11

Instructions for the User
3.2.3 Programming
Cooking duration: the 2nd button
duration. Before it can be set, the thermostat must be turned to the
cooking temperature required and the function selector knob to any
setting. To set the cooking duration, proceed as follows:
-
Press the key for 1 / 2 seconds; the pointer
will locate on 12 (Fig. 1).
-
Use the and
duration: each pressure on the
minute to the cooking duration, and every 12
minutes a new inside segment will light up
(figure 2 shows a cooking duration of 1 hour).
-
Once the duration required is obtained,
cooking will start about 6 seconds after the last
pressure on
-
Once cooking has started the display will show
the current time, represented by the constantly
illuminated segments, and the minutes left to
the end of the cooking time, represented by
the flashing segments (each flashing segment
means 12 minutes of cooking time left).
-
At the end of the cooking time the timer will switch the oven heating
elements off, the beeps will start to sound and the numbers on the
dial will flash.
-
The duration can also be reset by resetting the program selected:
pressing the central key
set and the oven will have to be switched off in manual mode.
Caution: it is not possible to set cooking durations of more than 6
hours.
can be pressed to set the cooking
keys to set the cooking
of .
for 1 or 2 seconds will delete the duration
key adds 1
1
2
45