Table of Contents
Advertisement
3.2 Using the Advanced CMOS Setup
Installed O/S
Select the operating system installed on your system which you will use most commonly. Note: An
incorrect setting can cause some operating systems to display unexpected behavior.
Reset Configuration Data
Select 'Yes' if you want to clear the Extended System Configuration Data (ESCD) area.
Large Disk Access Mode
UNIX, Novell NetWare, or other operating systems, select 'Other'. If you are installing new software
and the drive fails, change this selection and try again. Different operating systems require different
representations of drive geometries.
Local Bus IDE adapter
Enable the integrated local bus IDE adapter.
NumLock
Selects Power-on state for NumLock
SATA – Device 31, Function 2
Compatible: SATA Driver = Primary on SATA Controller, in Legacy Mode. PATA Driver = Secondary
on SATA Controller, in Legacy Mode.
Enhanced: SATA Driver = Primary on SATA Controller, in Native Mode. PATA Drive = Primary on
PATA Controller, in Legacy Mode.
AHCI Configuration
Enhanced AHCI: WinXP-SP1+IAA driver supports AHCI mode.
Legacy USB Support
Enable support for Legacy Universal Serial Bus.
Boot-time Diagnostic Screen
Display the diagnostic screen during boot
Advertisement
Table of Contents
