Listening To Fm Radio Broadcasts - Sony NW-A45 Help Manual

Help Guide
Digital Music Player
NW-A45/A45HN/A46HN/A47

Listening to FM radio broadcasts

Connect a pair of headphones to listen to FM radio. The headphone cord works as an antenna.
Connect a pair of headphones to the Walkman.
1
On the library screen, tap
2
The Walkman will switch to the FM radio function.
The FM radio switch (
Tap / ( ) repeatedly to select a frequency (
3
If you have preset a broadcast station, tap
To scan the previous or next receivable station
Hold down / ( ). The Walkman will start searching and stop when it receives a broadcast.
To change the scan sensitivity
Tap and then [FM Radio Settings]. Then, tap the desired setting for [Scan Sensitivity].
To change the monaural/auto setting
Tap and then [FM Radio Settings]. Then, tap the desired setting for [Mono/Auto].
Note
Sound quality settings do not apply to FM radio.
You cannot listen to FM radio while there is an active Bluetooth connection.
If you disconnect the headphones while you are listening to the FM radio, the FM radio switch will turn off automatically. Even if
you reconnect the headphones, the switch will not turn back on automatically. To listen to the FM radio again, reconnect the
headphone and tap the FM radio switch again.
The radio reception may not be stable if you use headphones other than the following.
IER-NW500N/NW500NE
MDR-NW750N/NW750NE
.
) will turn on automatically.
/
).
( ) repeatedly to select the preset station.
111