Cooling Fluid Level - PIAGGIO Beverly 300ie User Manual

CAUTION
IF THE VEHICLE IS USED ON DUSTY ROADS IT IS NECESSARY TO CARRY OUT
MAINTENANCE CHECKS OF THE AIR FILTER MORE OFTEN TO AVOID DAM-
AGING THE ENGINE.
Recommended products
AGIP FILTER OIL
Oil for air filter sponge
Mineral oil with specific additives for increased adhesiveness

Cooling fluid level (03_16, 03_17, 03_18, 03_19)

Engine cooling is carried out by a forced-circulation coolant system. The coolant con-
sists of a mixture 50% de-ionised water and 50% glycol ethylene-based antifreeze
solution with corrosion inhibitors. The coolant supplied with the scooter is already
mixed and ready for use.
For proper engine functioning, make sure that the temperature of the coolant remains
in the middle zone of the corresponding gauge. If the needle of the gauge enters the
red zone, stop the engine, let it cool down and check the coolant level; if the level is
OK, contact an Authorised Service Centre.
03_16
Check coolant when the engine is cold and as indicated in the scheduled maintenance
tables, following the steps below.
1. Set the vehicle upright on the stand and remove the cover by undoing screw «A».
2. Remove the expansion tank cover «B» by turning it anticlockwise.
3. Look inside the expansion tank and check that fluid level is always between the
«MIN» and «MAX» levels.
4. Top-up the fluid when it is close to the minimum mark.
49