Light Switch; Start-Up Button - PIAGGIO Beverly 300ie User Manual

Light switch (01_10)

When the light switch «A» is in position «0» the low-beam light is ON; when it is in
position «1» the high-beam light is ON. If the light switch «A» is pressed when set to
«2», the high-beam light flashing is activated. The switch goes back to «0» automat-
ically.
CAUTION
01_10
DO NOT CARRY ANY GARMENTS ON THE FRONT HEADLIGHT ASSEMBLY.
THIS MAY CAUSE BULBS TO OVERHEAT AND THEREFORE ABNORMAL
WEAR.

Start-up button (01_11)

Starter button «A». To start the vehicle, refer to the "starter motor" section.
01_11
15