Ports - Pentax G3100-R1 Instruction Manual

soft reboot the receiver resets the firmware, while retaining the current configurations. In a hard reboot
the G3100 will recall the receiver's boot configuration file (default reboot).
Table 4: Power Button Operations
What to do
ON
Press
OFF
Press
Data Logging
Press
ON/OFF
Soft Reboot
Press
Hard Reboot
Press

2.1.8. Ports

Figure 5: Ports Description
Table 5: Port Descriptions
LEMO Description
8-pin Data
5-pin Control
4-pin Power
and release, RED LED turns ON
and hold for 4 seconds and release or until power LED turns OFF
twice < 1 second apart and Data Logging LED turns ON/OFF
three times < 1 second apart and Soft Reboot will occur
four times < 1 second apart and Hard Reboot will occur
What to use it for
External Radio
Controller or Computer
External Power
Data (8-pin LEMO)
Serial 2
Power (4-pin LEMO)
External
Control (5-pin LEMO)
Serial 1
Page | 11