2.1.4. Using the G3100
For problem free operation, the user should read this G3100 User Manual thoroughly before first
use of the G3100.
2.1.5. G3100 Front Panel
Figure 4: G3100 Front Panel Label
2.1.6. Front Panel Description
Table 3: LED Operation
LED
ICON
BLUE
ORANGE
RED
GREEN
RED
2.1.7. Power Button
The power button is located on the front panel, and has the primary function for turning the G3100
ON or OFF. Secondary functions are for data logging On/Off, soft and hard receiver reboot/reset. In a
ON:
Established device Communication
OFF: Idle for device bonding
ON (Solid):
Transmitting RTK corrections
ON (Flashing): Receiving RTK corrections
OFF:
No RTK corrections
ON:
Receiver is Powered ON
OFF: Receiver is Powered OFF
Fast & Continuous (10 times per sec.)
Blinks 1 time, then pauses
Blinks 2 times, then pauses
Blinks 3 times, then pauses
Blinks 4 times, then pauses
Blinks 5 times, then pauses
Internal SD card Data Logging On
Bluetooth®
RTK
Power
Internal Data Logging
GNSS Satellite
Power Button
STATUS
0 Satellites
1,2 Satellites
3,4 Satellites
5,6 Satellites
7,8 Satellites
9+ Satellites
Page | 10