Troubleshooting - Oki LD630 Technical Reference

7. Troubleshooting

When printing doesn't work
Check network setting
When using Ethernet
-
-
-
When using WLAN
Check the wireless network setting of the AP and the printer.
(Refer to Configuration for checking/changing the printer settings)
-
-
-
-
-
IP Address
Check whether the IP Address band of the printer rand the AP (or
wireless terminals) are the same. The first three digits of the four digit
value in the IP Address must be the same.
Subnet Mask
Check whether the subnet mask of the printer matches with the one in
AP (or wireless terminal).
Port
Check whether the port configured in the printer and the host (PC,
PDA) are the same.
SSID
Check whether the SSID of the printer matches with the one in AP (or
wireless terminal)
802.11 mode
Check whether AP supports 802.11b or 802.11g.
Oki data printer supports 802.11b/g, and 802.11a is not supported.
Network Mode
Check the network mode of the printer.
Network mode must be set to "Infrastructure" to connect to AP and
"Ad-hoc" to connect between wireless terminals.
IP Address
Check the band of the IP Address.
Check whether the band of the printer and the AP (or wireless
terminals) are the same.
The first three digits of the four digit value of the IP address must be
the same.
Subnet Mask
Check whether the subnet mask of the printer matches the one in AP
(or wireless terminal).
- 47 -
LD630/LD640