Table of Contents
Advertisement
Only connect your device to products that have a USB-IF logo or have completed
the USB-IF compliance program.
Authorised retail points may also offer a battery replacement service.
When your device is low on power, it goes into power save mode. To deactivate
power save mode, press
save mode is activated, you may not be able to modify the settings of certain
applications.
Charge the battery
Your battery has been partially charged at the factory, but you may need to
recharge it before you can switch on your device for the first time.
If the device indicates a low charge, do the following:
1.
Connect the charger to the device.
2.
Connect the charger to the power supply.
You do not need to charge the battery for a specific length of time, and you can
use the device while it is charging.
If the battery is completely discharged, it may take several minutes before the
charging indicator appears on the display or before any calls can be made.
If the battery has not been used for a long time, to begin charging, you may need
to connect the charger, then disconnect and reconnect it.
Tip: You can also use a compatible USB charger to charge your battery.
© 2010 Nokia. All rights reserved.
, and select
Deactivate power
RM-659 03 Aug 2010
Getting started
saving. When power
13
Advertisement
Table of Contents
