Troubleshooting - Graco ultra clear vibe Owner's Manual

Troubleshooting

DO NOT ATTEMPT to modify the unit. Any
modifications to the transmitter and/or
receiver can void the operator's authority to
operate the equipment.
Most problems have a simple solution. First,
check that:
• Power is turned ON for both units
• Both units are plugged in (or fresh batteries
are in Parent Unit.
• Electrical outlet works
• Volume is turned up on Parent Unit
• Parent Unit is in range of the Nursery Unit
• Both Units are on the same channel.
No Sound
• Battery dead or weak — replace or use AC
adapter.
• AC adapter not properly connected — check
the connections.
• Nursery Unit covered or blocked — remove
the obstruction.
Weak Sound
• Nursery Unit too far from baby — move closer.
• Large objects blocking the signal — try
repositioning Nursery Unit.
• Volume setting too low — turn it up.
Static
• Interference from other electrical equipment
— eliminate cause of static (TVs, mixers,
computers, fans, fluorescent lights,
light dimmers, etc.)
• Parent Unit too far from Nursery Unit — move
them closer.
• Significant amount of obstructions between
Parent Unit and Nursery Unit such as walls,
ceilings & buildings.
Try moving the Nursery Unit to another part of
the room.
• Change channel on Nursery Unit.
Shrill Sound (Feedback)
• Nursery Unit and Parent Unit too close
together — move them farther apart.
• Volume set too high — lower the volume.
14