Kyocera Rise User Manual page 61

1. Press Home
2. Confirm Mobile data is set to
3. Touch next to Data usage cycle to change the period of time for which the chart
will display the data usage.
4. Touch either of the white lines on the chart to display the tabs. Drag the white tabs
horizontally to see the data usage of a specific period within the displayed cycle.

The usage amount will be displayed just below the chart.
Set Data Usage Limit
You can also set the limit for mobile data in case you don't have unlimited data plan which cuts
off data at a specified thresholds.
The usage displayed is measured by your phone. Your carrier's data usage
Warning:
accounting may differ and the usage in excess of your data limit plan can result
in charges. Data usage limit set in this menu is not guaranteed to prevent
additional charges.
1. Press Home
2. Touch to check Set mobile data limit. Read the message and touch OK.
3. Drag the red tab vertically to set the limit you want.

When your data usage reaches the limit, mobile data will be turned off automatically.
4. Drag the orange tab vertically to set the level you receive a warning.

When your data usage reaches the level set with the orange line, you will see the
message.
Restrict Data Usage by Application
You can restrict the background data usage.
1. Press Home
2. Press Menu
3. Read the message and touch OK.
Tip: You can see the Wi-Fi usage. Press Menu
Settings
> Menu and touch System settings > Data usage.
.
> Menu and touch System settings > Data usage.
> Menu and touch System settings > Data usage.
and touch Restrict background data to check it.
and touch Show Wi-Fi usage to check it.
51