Section 4 Programming Your Brewer - Keurig Vue V12000 Use & Care Manual

SECTION 3
Using Your Brewer
Adding Water
When the water supply is low, the Touchscreen will display
Coffee Coffee Brew
Café
Not Frothing
& Tea & Tea Over Ice Not
as pictured and the Water Reservoir light will flash.
Ready to Enjoy!
2 Step
Brew
H M
OZ
PM
Bottled or filtered water is recommended.
Tea Tea
Menu
Coffee Coffee Froth
Other Other
Size
Step2 Step2 Step1
Add Water
When brewing at sizes larger than 12 oz., if the Brewer senses the
Regular
Hot Hot
Café
Cocoa Cocoa
Strong
water level is low, the brewing process will stop until the Water
Reservoir is refilled. Once enough water has been added, the
brewing process will resume.
Do not remove the Water Reservoir during the brewing process.
There are three options for filling the Water Reservoir:
Option 1
Remove the Water Reservoir Lid and pour water directly
into the Water Reservoir. Replace the Lid.
Option 2
Instead of removing the Water Reservoir Lid, you can
lift the Flip Top. Pour water into the Water Reservoir.
Lower the Flip Top.
Option 3
You may also remove the Water Reservoir from
the Brewer to fill it. Replace the Lid and return
the filled Water Reservoir to the Brewer.
Do not remove the Water Reservoir during the brewing process.
14
Accessing the Settings Menu
When the Brewer is first turned on, a "Menu" option will appear
on the Touchscreen. Follow the steps below to access the
settings menu. Press and hold the menu button to access.
Use Menu button to tab through the setting options.
Setting the Clock
Step 1
Select the "Menu" icon on the Touchscreen.
Step 2
The "H" will flash, indicating you are programming the
hours. Use the + and – to change the hours. Press the menu
button again to set the minutes. Use the + and – to set the
minutes. The clock is on a 12h setting and will switch to AM/
PM once the 12h mark is passed.
Once the clock is set, press the Menu button to save your
settings. The screen will move to the next programmable
setting (Auto Off).
You must set the clock if you will be using the Auto
On/Off feature.
Programming the "Auto Off"
Feature
You can program the Brewer to automatically turn off after
a certain period of time after the last brew. This feature can
be used as an energy saver.
In "Auto Off" programming mode, use the + and – icons to
change the hours the Brewer will remain on after the last
brew. For example, if you select "2", the Brewer will turn off
two hours after the last brew. Select "Off" to not set the
"Auto Off" feature. Once the feature is set, press the Menu
button to save your settings. The screen will move to the
next programmable setting (Set On Time see page 16).
SECTION 4
Programming Your Brewer
Coffee Coffee Brew
Café
& Tea & Tea Over Ice
2 Step
Tea Tea
Froth
Coffee Coffee
Other Other
Step2 Step2 Step1
Regular
Hot Hot
Café
Cocoa Cocoa
Coffee Coffee Brew
Café
& Tea & Tea Over Ice
2 Step
Tea Tea
Froth
Coffee Coffee
Other Other
Step2 Step2 Step1
Regular
Hot Hot
Café
Cocoa Cocoa
Coffee Brew
Café
& Tea Over Ice
2 Step
Not Not Frothing
Ready to Enjoy!
Brew
H M
OZ
PM
Menu
Size
Frothing
Enjoy!
Brew
H M
OZ
PM
Menu
Size
Set Clock
H
Menu
Set Auto Off
15